Display Symbols - HoMedics BPA-260 Manual De Instrucciones

Display Symbols:

c
re
If any of the following letters and numbers appear in the area that
systolic pressure should be displayed, an error has occurred with
your reading. See Troubleshooting section of this manual for
more information.
BPA-260_A 323101305 0623.indd 11
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the heart rate per minute.
Irregular Heartbeat Detector: See page 24 for
more information.
START
Memory Average: Displays average of last 3 readings.
START START
STOP
STOP
STOP
Risk Category Index: See page 24 for more information.
START
STOP
Talking Feature On Symbol: Appears when talking function
is activated. (Speaker ON)
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Air Circuit Abnormality: Check cuff connection. Measure
again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear,
then measure again.
Error Determining Measurement Data: Measure again.
11
2010/6/23 下午 10:04