HOW THIS BLOOD PRESSURE
MONITOR WORKS
This monitor uses Smart Measure™ Technology
to detect your systolic pressure, diastolic pressure
and pulse. With one touch of a button, the cuff will
automatically inflate to block the blood flow through
your artery. Next, the deflation process starts. Smart
Measure™ Technology enables the monitor to
automatically inflate and deflate at the appropriate
level for each individual. Please note that any muscle
movement during inflation or deflation will cause
measurement error. When measurement is complete,
the monitor will display your systolic pressure, diastolic
pressure, and pulse readings.
The monitor automatically finds where your
measurement results fall on the NIH's National Heart
Lung and Blood Institute's table and provides a cue
if your reading falls into one of the stages that could
potentially indicate increased risk. Please refer to page
24 for more information on this feature.
The appearance of the
icon indicates that a pulse
irregularity consistent with an irregular heartbeat was
detected during measurement. Refer to page 24 for
more information on the Irregular Heartbeat Detector.
8
BPA-260_A 323101305 0623.indd 8
2010/6/23 下午 10:04