Performance 23393265 Manual Del Usuario página 11

7. Rear Shock Absorber Bolt (2) » Install
Install a NEW bolt.
8. Rear Shock Absorber Nut (1) » Install
Tighten
1. First Pass: 160 Nm (118 lb ft)
2. Final Pass: (90–105 degrees)
9. Rear Stabilizer Shaft Link Bolt (2) » Install
10. Rear Stabilizer Shaft Link Nut (1) » Install
Tighten 58 Nm (43 lb ft)
11. Remove the support from the rear suspension lower control arm.
12. Install the rear tire and wheel assembly.
Suspension Lowering Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
23393265
IR 19NO15
PART NO.
DATE
19NO15 Initial Release - Daniel Parrino
11
SHEET
REVISION
36
OF
AUTH
2204871