Performance 23393265 Manual Del Usuario página 8

11. Front Suspension Strut Mount Bolt (1) » Tighten [4x]
Tighten
1. First Pass: 35 Nm (26 lb ft)
2. Final Pass: (30–45 degrees)
Part 5: Rear Coil Spring Removal:
1. Remove the rear tire and wheel assembly.
2. Rear Stabilizer Shaft Link Nut (1) » Remove
3. Rear Stabilizer Shaft Link Bolt (2) » Remove
4. Rear Shock Absorber Nut (1) » Remove
5. Rear Shock Absorber Bolt (2) » Remove
DISCARD the bolt.
6. Support the lower control arm.
Suspension Lowering Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
23393265
IR 19NO15
PART NO.
DATE
19NO15 Initial Release - Daniel Parrino
8
SHEET
REVISION
36
OF
AUTH
2204871