Performance 23393265 Manual Del Usuario página 6

Part 4: Strut Assembly Installation:
1. Inspect the front suspension strut mount (1) before positioning the front suspension strut assembly on the vehicle. The strut
assembly MUST be installed with the larger ribs of the strut mount facing inboard.
2. Position the front suspension strut assembly (1) on the vehicle.
Caution: This vehicle is equipped with torque-to-yield or single use fasteners. Install a NEW torque-to-yield or single use
fastener when installing this component. Failure to replace the torque-to-yield or single use fastener could cause damage to
the vehicle or component.
3. Front Suspension Strut Mount Bolt (1) » Install, but do NOT tighten [4x]
Install NEW bolts.
Suspension Lowering Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
OUTBOARD
23393265
IR 19NO15
PART NO.
DATE
19NO15 Initial Release - Daniel Parrino
INBOARD
SHEET
REVISION
6 36
OF
AUTH
2204871