Installation, Programming And Maintenance; Installation - Zummo Z06 NATURE Manual De Usuario

Ocultar thumbs Ver también para Z06 NATURE:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7. INSTALLATION, PROGRAMMING AND MAINTENANCE

It is compulsory for the machine to be earthed to avoid the possibility of people being given shocks
or damage to the equipment.
The plug must be easily accessible once the installation is complete. The use of extension cables,
adaptors and multiple sockets is not permitted.

7.1. INSTALLATION

Attention! The machine weighs 52 Kg. When moving machine, we suggest that this be accomplished
by two persons. The best way to handle a machine is to use one hand to get a grip underneath the
rear and the other placed beneath the squeezing tray (fig. 18).
Place the machine on a sufficiently sturdy and stable base.
Ensure that the machine's voltage and frequency match the values of your electrical installation.
See the identification plate (fig. 19).
Use an electrical outlet that is equipped with an effective earth connection. This outlet should be
used exclusively by the juice extraction machine. Do not plug other appliances into the outlet.
Before turning on the machine, it is recommended that the pieces that will be in contact with juice
be cleaned first (cups, balls, blade, tray, filter and plastic front).
Turn on the power switch (fig. 6). If no message appears on the display (fig. 20), this means that
there is a lack of voltage; in this case, make sure that you have plugged the machine into a live line
and that the power switch is turned on. Once this problem has been taken care of, one of the
following messages will appear:
Disp. 1
Disp.3a
Disp.4
37
Disp. 2
Disp. 3b
Disp. 5a

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido