Connecting To A Heating Appliance With A Jv-Pc Interface; Telephone Connection - Vaillant vrnetDIALOG 820 Manual De Instrucciones

5.3 Connecting to a heating appliance
with a JV-PC interface
Note
To connect a heating appliances use
the black lead with the RJ 12 plug
(6-pin).
Use the short lead for installation in
the boiler and the long lead for instal-
lation in an external housing.
• Plug the connector on one end of the lead
to the X80 edge connector of the vrnetDIA-
LOG circuit board and the RJ 12 plug into
the X6 socket on the heating appliance.
• Install the circuit board in the switch box of
the appliance electronics or use the housing
provided.
Installation Manual for vrnetDIALOG
Electrical installation 5
Fig. 5.4 Connection to a heating appliance
5.4

Telephone connection

5.4.1 Connecting the vrnetDIALOG 820
(analogue)
The vrnetDIALOG 820 is supplied with a 2 m
lead and RJ 12 plug and adapter for connec-
tion to standard local telephone sockets.
The lead cannot be lengthened using standard
extension cables.
GB 13