Forch 5352 5000 Manual De Instrucciones página 22

Drilling Machine 13 mm clockwise/
ENG
counter-clockwise rotation „Super Silent"
Using the device
Protection against mechanical hazard
■ Operation by trained staff only
■ Wear eye and ear protection.
■ Never point device towards people.
■ Never direct compressed air towards people.
■ Use compressed air with max. 6.2 bar at the air inlet.
■ Hoses and connections have to have suitable size and be fixed safely.
■ In case tool is not used, accessories are changed or a repair is to be executed, always
separate from the air supply. (First allow the air to escape from the hose, putting the
machine to the idle.)
■
Before getting near a dissolved whipping air hose always turn off the air supply.
■
Do not use damaged, frayed or worn out air hoses and connections
■
Check the housing for leaks and damages.
■
Keep your body and body parts away from movable dangerous parts
■
Only use faultless, suitable accessories.
■
Never use a damaged, not correctly functioning tool or accessory part.
■
For safety reasons the tool fitting always has to be in faultless condition.
■
Check the device for damages at regular intervals.
■
Wear personal protective equipment.
■
As soon as malfunction of the machine is detected have the device checked by qualified
staff and have it sent to an authorised repair shop.
Protection against electrical hazard
■
Pneumatic devices are not come into contact with electrical power sources.
■
Pneumatic devices are not insulated against electric shock.
Protection against noise
■ When releasing the compressed air connection always wear ear protection.
■ High noise levels can cause permanent hearing damage.
Protection against material / substance hazards
■ Only use approved cleaning solutions for cleaning. These cleaning solutions have to
comply with the safety and health standards
■ Only use cleaning solutions in well-ventilated areas.
■ The exhaust air of a pneumatic device could contain oil.
■ Do not use device in hazardous areas and environments.
■
(incl. such substances like smoke, gas or dust.)
■
Do not clean pneumatic device with flammable or volatile liquids such as kerosene or
diesel.
■
Only use lubricants recommended by the manufacturer.