Tripp-Lite B127A-1A1-BHBH Manual Del Propietário página 12

Standard Extender Kit Installation
8.
9.
10. The (orange) RJ45 LED will illuminate on both the local
-10-008-933D27-Book.indb 12 -10-008-933D27-Book.indb 12
Connect the external power supply to either the transmitter
or receiver unit. Plug it into an available wall outlet or a
Tripp Lite surge protector, power distribution unit (PDU) or
uninterruptible power supply (UPS). The POWER (green)
LED on the local transmitter unit will illuminate to indicate
the unit is receiving power from the external power supply.
The POWER (green) LED on the remote receiver unit will
illuminate to indicate the unit is receiving power from the
local transmitter unit through PoC technology.
Turn on the power to the HDMI source. The OUTPUT (orange)
LED on the local transmitter unit will illuminate to indicate a
signal is being received from the source.
transmitter and remote receiver units to indicate a signal is
being received from the source to display. The screen should
now display on the connected monitor(s).
12
4/21/2021 4:00:30 PM 4/21/2021 4:00:30 PM