Tripp-Lite B127A-1A1-BHBH Manual Del Propietário página 15

Standard Extender Kit Installation
8.
9.
10. The (orange) RJ45 LED will illuminate on both local
-10-008-933D27-Book.indb 15 -10-008-933D27-Book.indb 15
Connect the external power supply to the transmitter
unit. Plug it into an available wall outlet or a Tripp Lite
surge protector, power distribution unit or uninterruptible
power supply (UPS). The POWER (green) LED on the local
transmitter unit will illuminate to indicate the unit is receiving
power from the external power supply. The POWER (green)
LED on the remote receiver unit will illuminate to indicate the
unit is receiving power from the local transmitter unit through
PoC technology.
Turn on the power to the HDMI source. The OUTPUT (orange)
LED on the local transmitter unit will illuminate to indicate a
signal is being received from the source.
transmitter and remote receiver units to indicate a signal
is being received from source to display. The screen should
now display on the connected monitor(s).
15
4/21/2021 4:00:30 PM 4/21/2021 4:00:30 PM