Tripp-Lite B127A-1A1-BHBH Manual Del Propietário página 18

Standard Extender Kit Installation
7.
8.
9.
-10-008-933D27-Book.indb 18 -10-008-933D27-Book.indb 18
Connect the external power supply to the transmitter. Plug
it into an available wall outlet or a Tripp Lite surge protector,
power distribution or uninterruptible power supply (UPS).
The POWER (green) LED on the local transmitter unit will
illuminate to indicate the unit is receiving power from the
external power supply. The POWER (green) LED on the
remote receiver unit will illuminate to indicate the unit is
receiving power from the local transmitter unit through PoC
technology.
Turn on the power to the HDMI source. The OUTPUT (orange)
LED on the local transmitter unit will illuminate to indicate a
signal is being received from the source.
The (orange) RJ45 LED will illuminate on both the local
transmitter and remote receiver units to indicate a signal is
being received from the source to display. The screen should
now display on the connected monitor.
18
4/21/2021 4:00:30 PM 4/21/2021 4:00:30 PM