Metra 95-3020B Instrucciones De Instalación página 3

5. Unclip and remove the vents on both
sides of the radio. (Figure E)
6. Remove the (2) 5/16" screws from the
top of the climate control panel.
(Figure F)
7. Unclip and remove the fuse trim panel
directly below the climate control panel.
(Figure F)
DASH DISASSEMBLY
(Figure E)
(Figure F)
(CONT.)
8. Unclip and remove the climate control
panel, and then remove the (2) 5/16"
screws now exposed. (Figure G, H)
9. Unclip and remove the radio/hazard
switch assembly. Remove the hazard
switch from the assembly. The switch
will be reused in kit preparation.
(Figure H)
Continue to Kit Preparation
(Figure G)
(Figure H)
REV. 9/1/2020 INST95-3020
3