Kit Assembly - Metra 95-3020B Instrucciones De Instalación

ISO DDIN radio provision
1. Secure the radio to the radio brackets
using the screws supplied with the
radio. (Figure A)
2. Attach the assembly to the radio
housing using the (4) #8 x 3/8" Phillips
screws provided. (Figure B)
3. Locate the factory wiring harness and
connector in the dash and complete
all necessary connections to the radio.
Metra recommends using the proper
mating adapter from Metra and/
or Axxess. Test the radio for proper
operation.
4. Secure the completed assembly into the
dash using the factory screws.
5. Reassemble the dash in reverse order of
disassembly, using the radio trim panel
instead of the factory panel.

KIT ASSEMBLY

(Figure A) (Figure B)
REV. 9/1/2020 INST95-3020
5