Tools Needed - Sanus BLT3 Manual De Instrucciones

PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Please read through these instructions completely to be sure you're comfortable with this easy install process.
Check your TV owner's manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of
this product, contact Customer Service.
CAUTION:
Avoid potential personal injuries and property damage!
● This product is designed ONLY to be installed into wood stud, solid concrete or concrete block or steel stud walls.
— DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.
● This product is designed for INDOOR USE ONLY.
● The wall must be capable of supporting five times the weight of the TV and mount combined.
● Do not use this product for any purpose not explicitly specified by manufacturer.
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
TV Weight Limit
(including accessories)
DO NOT EXCEED
Wall
Construction
ONLY install on
these acceptable
wall types.
Unsure
Call Customer Service

Tools Needed

Stud Finder
2
IMPORTANT SAFETY INSTRUCTIONS
For Wood Stud
CAUTION:
DO NOT
install
in drywall alone
Drywall alone
will hold
NOT
the weight
of your TV.
Tape
Measure
7/32 in.
(5.5 mm)
Wood
Awl
Drill Bit
150 lbs.
(68.0 kg)
Solid Concrete or For Steel
Concrete Block Stud Walls
Walls
Wood studs
ACCEPTABLE
Pencil Level
3/8 in.
(10 mm)
Concrete
Drill Bit Hammer
If your TV, plus accessories, weighs MORE
than indicated, this mount is NOT compatible.
Visit SANUS.com or call customer service to
find a compatible mount.
Solid concrete or Steel studs
concrete block
Steel stud kit SSMK1
is required for install,
but NOT INCLUDED.
ACCEPTABLE
Call Customer Service
Screwdriver Electric
Drill
Stud Finder
1/2 in.
(13 mm)
Socket
Wrench
1/2 in.
(13 mm)
Steel
Awl
Drill Bit