Metra 99-3014G Instrucciones De Instalación página 5

Double DIN radio provision
1. Attach the brackets to the radio
trim panel using the (4) #8 x 3/8"
screws supplied. (Figure A)
2. Slide the radio into the bracket/
radio housing assembly and secure
to the assembly using the screws
supplied with the radio. (Figure B)
3. Clip factory climate controls into
the radio trim panel
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
99-3014G
(Figure B)
5