Motorola PMLN6521 Guia Del Usuario página 6

PLACING AND REMOVING THE
PORTABLE TERMINAL TO AND FROM
THE CRADLE/HOLDER
PLACING THE PORTABLE TERMINAL IN THE
CRADLE/HOLDER
1. Place the TETRA Handportable Terminal in the cradle by
aligning the slots on the lower side of the TETRA Handportable
Terminal with the alignment guides located at the bottom of the
cradle as shown in Figure 1. Make sure that the TETRA
Handportable RF Dust Cover is open (see Figure 2) before
inserting it to the cradle.
2. Push the TETRA Handportable Terminal downward toward the
bottom of the cradle and rotate backwards until it locks into
place.
Cradle Release
Button
Alignment
Guide
Figure 1. Vehicular Cradle.
Figure 2. TETRA Handportable Terminal.
RF Dust Cover
4