Rampage 9950919 Manual Del Usuario página 5

Installation Steps
Insert bearing race of NSK Bearing (small) into the top of the tube by tapping evenly all around the edge.
Note: Make sure tapping evenly the bearing race all around the edge and fully seated into the housing.
8
Place the Swing Away onto the pivot on the bumper.
9
11
I-9950919 REV. B
NOTE: Actual product may vary from illustration.
Page 5 of 8
Pack the NSK Bearing (small) with Marine-Grade grease.
Insert the NSK Bearing (small) and place Pivot Flat
Washer in the house, on the Pivot and into the Race.
10
March 2020