Tools Required - Rampage 9950919 Manual Del Usuario

Tools Required

Socket
Allen Wrench
Torx Head Screwdriver
18mm Wrench
Socket Wrench
(18 & 19 mm)
4mm
Safety Glasses
Crimps
Before Installation Remove Original Bumper
Using appropriate tools, remove the factory original rear bumper by
removing all of the bolts and nuts
can be discarded as the installation kit
holding the bumper to frame mount brackets. The original hardware
contains all new necessary attaching hardware for your Trail Guard Bumper. Note: The original
third brake light assembly will be re-used later in this installation. If needed please reference
original owners manual.
Page 2 of 8
March 2020
I-9950919 REV. B