Commissioning And Operation - Klarstein 10035064 Manual Del Usuario

Remote control

COMMISSIONING AND OPERATION

Before using the device, make sure that the device and its accessories are in good
condition.
Since some of the elements are disassembled for packing when shipped from the
factory, these special elements are removed separately when you take them out of
the packing box. Since the unit is mainly made of glass, carefully check that it is in
good condition when removing it from the packaging. If you discover that it has been
damaged during transport, immediately inform the manufacturer or customer service.
Operation
• Place the device on a stable surface.
• Insert the power plug of the unit into a 220-240 V ~ 50 Hz power outlet and set the
power switch located on the side of the unit to the „I" position. A beep will then be
heard.
• Switch the unit on by pressing the button
temperature. You can set the power, temperature and time by touching the control
panel or remote control.
• Turn the unit off and unplug the power cord from the wall outlet when it is not used
for a long period of time.
• Do not cover the unit under any circumstances. Do not place the unit in showers or
swimming pools.
1 On/Off
2 Mode button
3 Temperature button
4 timer
5 Child lock
. The LE screen displays the room
EN
21