Kohler WELLWORTH K-3422 Instrucciones De Instalación página 2

ROUGHING-IN
K-3422
K-3423
K-3427
K-3432
A
1"
(2.5cm)
3-1/4"
(8.3cm)
E
INSTALLATION
TO REMOVE THE EXISTING TOILET
Turn off the water supply. Flush the toilet, and use a
sponge to remove the remaining water from the tank and
bowl. Disconnect the supply shut-off valve (if present),
and remove the old tank and bowl.
Use a putty knife to remove the old gasket from the floor
and closet flange. Remove and discard the old T-bolts.
NOTICE: If you are not going to install the new toilet
immediately, temporarily stuff a rag in the closet flange.
A
1007285-2-
A B
29" (73.7cm) 16" (40.6cm)
26-3/4" (67.9cm) 14" (35.6cm)
29" (73.7cm) 16" (40.6cm)
29" (73.7cm) 17-1/2" (44.5cm) 4-1/4" (10.8cm) 14-1/2" (36.8cm) 10" (25.4cm)
s
D
3/8" I.P.S. SUPPLY
C L OF OUTLET
C D
5-5/8" (14.3cm) 14-1/2" (36.8cm) 12" (30.5cm)
6-1/8" (15.6cm) 14-1/2" (36.8cm) 12" (30.5cm)
5-5/8" (14.3cm) 16-1/2" (41.9cm) 12" (30.5cm)
19-5/8"
(49.8cm)
F
G
5-1/8"
(13cm)
Fig. #1
2
E F G
28" (71.1cm) 8" (20.3cm)
28" (71.1cm) 8" (20.3cm)
30" (76.2cm) 10" (25.4cm)
28" (71.1cm) 8" (20.3cm)
FRONT OF BOWL
B
C
9-5/8"
(24.4cm)
Closet Flange
Fig. #2
Kohler Co., Kohler, WI U.S.A.