3. Remove the LED light mounting screw.
4. Unplug the LED light from the harness, replace with
LED light of part #5304499540. To order parts call
(833) 337-4006. Then reconnect the harness.
5. Re-install LED light and mounting screw.
When re-installing mounting screw be careful not to
damage the LED light.
6. Re-install LED light cover and mounting screw.
7. Plug the microwave back into the power supply or
turn the power back on at the main circuit breaker.
Charcoal filter replacement
Charcoal filter part number 5304464577
To order parts call (833) 337-4006
Charcoal Filter when installed in your microwave oven,is
used for nonvented, recirculated Installation. The filter
should be changed every 6 to 12 months depending on
use.
1. Disconnect power to the microwave oven at the
circuit breaker panel or by unplugging.
2. Remove the vent grill cover mounting screw.
3. Open the vent grille door.
24
4. Remove the charcoal filter by pushing the top of the
filter inwards, then pull it forward out from the unit.
5. Slide the top of the new charcoal filter into? the top
area of the filter cavity.
6. Press the bottom of charcoal filter to place it into the
correct position.
7. Close the vent grille door and mount the screw.
Carbon Filter replacement
For replacement or call (OPTIONAL) (833) 337-4006
ask for OTRFILTER1.
The Carbon Filter is labeled as optional apart from the
Charcoal filter)
V
Replace filter every 6 months.
The Carbon Filter, when used with the recirculation fan,
reduces cooking odors from your cooktop surface by
trapping, neutralizing and removing odor-causing
molecules. The proprietary activated carbon is 10 times
more effective at reducing cooking odors than standard
charcoal filters. For best results, replace every 6 months.
1. Remove the Carbon Filter from the packaging and
shake filter to remove excess carbon.
2. Use a Phillips head screwdriver to unscrew the
Carbon Filter access door.
EN