Pc Communication - Minipa MX-1050 Manual De Instrucciones

Figure 8 Figure 9 a
a
The figure 8 refers to the opening circuit calibration fail, where the display exhibits
"FAIL" "Open" indicating a problem. Verify if the test terminal is in opening circuit to
assure the recalibration.
Figure 10
g a
The figure 9 refers to the short circuit calibration fail. The display exhibits "FAIL"
"Srt" for fail in the calibration. Verify if the test terminal is in short circuit to assure
the recalibration.
a
Figure 11
H. PC Communication
Press the "USB" key to enter in the communication function. The " " symbol will
be exhibited in the display. Insert the USB cable and start the software to perform
the data transmission. Press the "USB" key again to leave of the communication
function and interrupt the data transmission.
12