Dash Disassembly - Metra 95-7356B Instrucciones De Instalación

1. Unclip and remove the small trim below
the climate controls, then remove (1)
Phillips screw from the radio trim panel.
(Figure A)
2. Unsnap and remove the radio trim
panel. (Figure B)
3. Remove the panel clips from the factory
radio, save them for the Kit Assembly.
4. Pull out the factory hazard button, save
it for the Kit Assembly.
5. Unscrew (4) Phillips screws, then remove
the factory radio, save them for the Kit
Assembly.
Continue to Kit Assembly
2

DASH DISASSEMBLY

(Figure A) (Figure B)
386.257.1187
|
MetraOnline.com