Product Description And Specifications - Bosch GDR Professional 14,4 V-LI MF Manual Origina

14 | English
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 Use only original Bosch batteries with the voltage list-
ed on the nameplate of your power tool. When using oth-
er batteries, e.g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws,
for tightening and loosening nuts within the given dimensional
range. In drilling position and with the appropriate application
tool, the machine is also suitable for drilling in wood, metal,
ceramics and plastic.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Tool holder
2 Locking sleeve
3 "PowerLight"
4 "Drilling/screwdriving" selector switch
5 Carrying strap
6 Belt clip*
Technical Data
Cordless Impact Screwdriver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
– Operating mode impact driving
Impact rate
Technical data determined with battery from delivery scope.
1 609 92A 0C1 | (19.9.13)
7 Battery pack*
8 Battery unlocking button*
9 Rotational direction switch
10 On/Off switch
11 Drill bit with hexagon shank*
12 Screwdriver bit with ball catch*
13 Universal bit holder*
14 Screwdriver bit*
15 Carbon brushes
16 Cover lid
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 93 dB(A); Sound power level
104 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
For tightening screws and nuts within the maximal permitted
2
size: a =13 m/s , K=1.5 m/s
h
Drilling in metal: a =4.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
GDR 14,4 V-LI MF
3 601 JA1 9..
V=
-1
min
-1
min 0 –2800
-1
min 0 –2800
-1
min 0 –3200
2
,
2 2
, K =2 m/s .
GDR 18 V-LI MF
3 601 JA1 0..
14.4
0 –750
Bosch Power Tools
18
0 –750
0 –2800
0 –2800
0 –3200