Toto RENESSE Manual Del Usuario página 6

1) Installation of the valve
1) Confirm the rough-in provided and install the valve.
2) Depending on the Shower Setup Options (Refer to the Setup Options page), connect
all the valves (Thermostatic Mixing Valve, Volume Control Valve(s) and Handshower
Adapter (They all are sold
separately)).
Caution
●
Perpare all tools and
plumbing accessories for
all the connections of the
Shower.
●
Be sure to use the pipe seal
for all pipe connections.
●
Do not lose the guard
cover.
Makeuse of it to confirm the
rough-in and to protect the
valve.
●
Remove the plug if wall
spout will be used.
If not, leave the outlet
plugged.
5
Thermostatic
Mixing Valve
Remove.
Plug
Thermostatic
Mixing Valve
(Rough-in and Connections)
Thermostatic
4-15/16" (125 mm)
Mixing Valve
HOT to COLD supply
Lower limit
Guard Cover
Showerhead
Dual Vol
Control
Valve
HOT
Wall Spout
FINISHED
WALL
Upper limit
1/2" pipe
Single Vol
Control
Valve
COLD
Hand Shower
Adapter