Toto RENESSE Manual Del Usuario página 7

2) Installation of the Valve
3) Before installation,
must be washed out entirely.
4) Connect the Hot and Cold Water Supply Lines.
①Install cold/hot water supply lines.
② Connect the union (provided in the package)
to Hot and Cold Water Supply Lines.
Caution
●
Wrap the insulating material
around the HOT water Supply
Pipe
●
Attach both unions provided so
that supply lines will be at the
same level.
GOOD
③ Fasten the thermostatic mixing valve with the nuts of unions.
④ After connecting the supply pipes,
the Shower set and confirm that there is no leakage in all joints.
dirt and debris in the Hot and Cold water supply lines
HOT water
supply
Insulating
Material
BAD
do the water test by running the water in
(Water Supply Lines)
1/2"
NPT
Thermostatic Mixing
valve
Union
Elbow
Elbow
COLD water
supply
6