Warnings - Assembly Text Instructions - Maintenance - Extremis AMAi Manual De Instrucciones

Warnings – Assembly text instructions – Maintenance
English
WARNINGS
General
• Do not use any sharp tools to open the
packaging.
• We strongly advise against using power tools.
• Tripping hazard, mind your step.
• Do not put out cigarettes on the table.
• Not grafitti proof.
• Do not leave children unattended whilst playing
on the table.
• away from babies and children.
• Colors can differ over years and from batch to
batch.
Product
• Do not drag the table, but carry it with minimum
2 people.
• Anchoring the product has to be done by
qualified people.
• For anchoring: use suitable bolts or screws from
a specialized store depending on the material
your terrace is made of.
Wood
• When delivered, the wood is untreated.
• Wood is a natural material and its look is different
for every slat, plank and tree.
• Wood will gradually become rougher and start
to turn grey as a consequence of exposure to the
sun and rain. We recommend oiling the wood
once or twice a year. 1x before the Summer and 1x
after the Summer as protection for the Winter.
• Cleaning regularly with mild detergent. Never use
a high pressure cleaner as this will roughen the
wood's smooth surface and irreparably damage
the wood's fibress.
• Thorough cleaning with Extremis Wood Cleaner.
• We strongly recommend that you treat your wood
with wood oil to protect it from stains - Small
cracks and crevices can also appear as part of
this process. We strongly advise everyone to treat
the furniture with our Wood Protector. It is best to
repeat this treatment each year.
Galvanized steel
• Galvanization will become less shiny when used
outdoors.
• Flame retarding - NEN-EN13501-1 A1 - Class A1
48
products will not contribute to fire in any stage,
including fully developed fire. For this reason,
they are assumed to be capable of satisfying all
requirements of all lower classes as well.
• Possible impurities in the immersion tank can
cause black marks during galvanization, which
are intrinsic to this industrial finishing technique.
• White marks on this zinc layer are also intrinsic
to this procedure and will disappear when the
furniture is put outdoors.
• This industrial finishing technique may result in a
rougher surface. This is intrinsic to the process.
Powder coating
• White powder coating requires more
maintenance.
• Do not use abrasive scouring powders or
scourers as they will scratch the surface.
• Color can fade to some extent when exposed to
UV.
• Flame retarding - NEN-EN13501-1 A2-sl -
Satisfying the same criteria as Class B for the
SBI-test according to EN13823. In addition,
under conditions of a fully developed fire these
products will nog significantly contribute to the
fire load and fire growth.
• Dark colors can get very hot in sunny weather.
Stainless steel
• Very good UV colour fastness.
• Flame retarding: NEN-EN13501-1 A1 - Class A1
products will not contribute to fire in any stage,
including fully developed fire. For this reason,
they are assumed to be capable of satisfying all
requirements of all lower classes as well.
• Watch out, stainless steel isn't entirely rustproof!
Be sure to avoid contact with iron objects. If it
does show signs of rust, clean with rust remover
as quickly as possible.
ASSEMBLY INSTRUCTIONS
Standaardmodule - p8
1. Open de dozen van de A-frames en haal de
isomo blokken uit de doos. Leg 2 isomo blokken
op de grond op de plaats waar je de AMAi wil
installeren. Zorg ervoor dat deblokken ongeveer
160 cm van elkaar staan.
2. Plaats de voetsteun op de 2 isomo blokken.
3. Bevestig aan 1 zijde van de voetsteun het eerste
A-frame mét de eindplaat aan de buitenkant