Molex Connection - Acuity Brands AEDAN Instrucciones De Instalación

MOLEX CONNECTION(S):
1. Engaging the Molex Connector(s):
a. Align the male and female connector(s) as shown and push to engage.
1a
2. Disengaging the Molex connector(s):
a. Identify the small gap between the male and female sides.
b. Insert a small flat-head screwdriver into the slot and twist. The connector(s) should come apart.
2a
1a.1
(Figure 2a)
2b
(Figure 1a)
1a.2
2b.1
(Figure 2b)
13