Luminaire Body; (Attached To Luminaire Body); Back Box; Mounting Plate With Drivers - Acuity Brands AEDAN Instrucciones De Instalación

5) 8-32 x 1" Mounting Fasteners

4) Mounting Plate with Drivers

Purple and Grey lines for 0-10V Dimming
If not used, the wires are to be capped off.
4" Octagon or Full-size Round
or Square J-box, or Double Gang
Switchbox supplied by others
Line Voltage & Ground wires
LUMINAIRE WIRING AND FIXTURE OPERATION CAUTION: CONNECT FIXTURE TO SUPPLY WIRES RATED FOR AT LEAST 60ºC.
CAUTION: FIXTURE MUST BE CONNECTED TO A NOMINAL 120V, 60 HZ POWER SOURCE ONLY.
LOW VOLTAGE WIRING FROM DIMMER TO DRIVER SUPPLIED BY OTHERS.

3) Back Box

Low-Voltage Wire Connections
(Using supplied Molex connectors)
FIXTURE DIAGRAM
1) Aedan Sconce

Luminaire Body

2) 8-32 x 1" Set Screws

(attached to luminaire body)

5