Carrera DIGITAL 124 Instrucciones De Uso Y Montaje página 8

Table of contents
Safety instructions
Description
Functions
Contents of package
Important information
Assembly instructions
Electrical connection
Connections
Control elements
Encoding/programming of cars
to the according speed controllers
Encoding/programming of Autonomous Car
Encoding/programming Pace Car
Display of position Autonomous and Pace Car
Setting of the cars´ basic speed
Setting of cars´ braking performance
Setting fuel tank capacity
Deactivating Settings Keys
Extended Pit Lane function
Sound ON/OFF
Reset function
Energy-saving mode
Starting sequence
Maintenance and care
Troubleshooting/Driving tips
Technical specifications
Welcome
Welcome to the Team Carrera!
These operating instructions contain important information regard-
ing the assembly and operation of your Carrera DIGITAL 124/132
Control Unit. Please read them carefully and keep them in a safe
place afterwards.
If you have any queries, please do not hesitate to contact our dis-
tributor or visit our website:
carrera-toys.com
Please check the contents for completeness and possible transport
damage. The packaging contains important information and should
also be retained.
We hope you will derive a lot of pleasure from your new Carrera
DIGITAL 124/132 Control Unit.
Safety instructions
• WARNING! Not suitable for children under 36 months. Danger of
suffocation due to small parts which may be swallowed. Caution:
risk of pinching caused by function.
• WARNING!
This toy contains magnets or magnetic components. Magnets at-
tracting each other or a metallic object inside the human body may
cause serious or fatal injuries. Seek medical attention immediately if
magnets are swallowed or inhaled.
• WARNING!
Only allow children at least 8 years old to use the battery charger.
Sufficient instruction must be given to enable the child to use the
battery charger in a safe way and explain that it is not a toy and
must not be played with.
• The transformer is not a toy! Do not short-circuit the transformer's
connections! Note to parents: Regularly inspect the transformer for
damage to the cable, plug or housing! Only operate the toy with rec-
ommended transformers! The transformer may no longer be used
if it is damaged! Only operate the racetrack with a transformer! If
play is interrupted for longer periods, it is recommended to separate
the transformer from the power supply. Do not open transformer or
speed controller housings!
Important note to parents:
Transformers and power supply units are not suitable to be used as
toys. The use of such products needs to be constantly supervised
by the parents.
• Regularly check the track, cars and charger for damage to cables,
plugs and housings! Replace defective parts.
• The car racetrack is not suitable for outdoor operation or operation
in wet locations! Keep away from liquids.
• Do not place any metal parts onto the track to avoid short-circuits.
Do not place the track in the immediate vicinity of delicate objects,
as these could be damaged by cars hurled from the track.
• Disconnect the plug before cleaning or servicing the racetrack!
Only use a damp cloth for cleaning, no solvents or chemicals. When
it is not in use, store the track in a dry and dust-protected location,
preferably in the original cardboard box.
• Do not operate race track at face- or eye-level – risk of injury due
to cars being catapulted off the track.
• Misuse of transformer can cause electrical shock.
8
• The toy is only to be connected to Class II equipment
bearing the following symbol.
• The toy and the charger must only be used with a transformer
designed for toys.
8 • Not to be used with controllable transformers.
8 • If the supply cord is damaged, it must be replaced by the manu-
8 facturer, its service agent or similary qualified persons in order to
8 avoid danger.
8
Note:
8
8 The vehicle may only be operated again in a completely assembled
9 condition. Assembly may only be carried out by an adult.
9 Please keep the operation instructions in safe place as it contains
important information.
9 Please also refer to the operating instructions of the Carrera DIG-
9 ITAL 124/132 basic set!
9
9
10
Description
10
10
10
10 The Control Unit is the central unit controlling the entire race.
11 Numerous settings and the programming of speed, braking per-
11
formance, cars´ tank capacity as well as Pace Car and Pit Stop
11 function may be carried out via different operating keys. Moreover,
11 the Control Unit acts as connecting unit to the power supply, speed
11 controller, speed controller extension set, Wireless-Tower, PC-Unit
11 and lap counter 20030342.
11
Functions
• Programming of cars
• Setting of cars´maximum speed
• Setting of cars´ braking performance
• Fuelling function which can be switched on/off
• Setting of cars´ tank capacity at the start of the race (only in
combination with Pit Stop 20030356 and Driver Display
20030353)
• Controlling of driving characteristics with fuelling function being
switched on in real mode
• Individual fuelling option in combination with Pit Lane 20030356 and
Driver Display 20030353
• Lap counting function in Pit Lane 20030356 which can be switched
on/off
• Pace Car function
• Lap counting in combination with Position Tower 20030357
• Display function for Pace Car and Autonomous Car on Position
Tower which can be switched on/off
• Sound of Control Unit which can be switched on /off
• Control of Startlight 20030354
• Reset function
• Power-save mode
• Deactivating Settings Keys
Contents of package
1x
1x
1x
1 Carrera DIGITAL 124/132 Control Unit
1 End piece right
1 End piece left
8 Track section interlocks
Instructions
Please check the contents for completeness and possible transport
damage. The packaging contains important information and should
also be retained.
Important information
EVOLUTION Carrera DIGITAL 124/132
Carrera DIGITAL 124/132
Please note that Evolution (analog system) and Carrera
DIGITAL 124/132 (digital system) involve two separate and com-
pletely independent systems. We hereby expressly indicate that
both systems must be kept separate when setting up the track, i.e.
no connecting rail from Evolution may be used together with the con-
necting rail and Black Box of the Carrera DIGITAL 124/132, even if only
one of the two connecting rails (Evolution connecting rail or Carrera
DIGITAL 124/132 connecting rail and Black Box) is attached to the
current supply. Furthermore, no other Carrera DIGITAL 124/132
components (switches, electronic lap counter, pit stop) may be built
into an Evolution course, i.e. via analog operation.
Non-compliance with the above information may result in damage or
destruction of the respective Carrera DIGITAL 124/132 components.
In this case no warranty may be claimed.
1
2
+ +
1 2
in the track as shown in figure
base. Move the connecting clips according to figure
of the arrow until they audibly snap in. The connecting clip may also
be inserted later. The connecting clips can be removed into both
directions by simply pressing down the clamped nose (see fig.
Fastening: To fasten the track sections on a board, it is nec-
4
essary to use the track section fasteners (Item no. 20085209, not
contained in the package).
8x Note:
Carpeting is not a suitable foundation on which to build the track be-
cause of static charging, formation of fluff and ready inflammability.
1x
1
Connect the transformer plug with the Control Unit.
1
Note: To avoid short-circuits and electrocution, the toy may not be
connected using foreign devices, plugs, cables or other objects for-
eign to this toy. The Carrera DIGITAL 124/132 car racetrack only
works properly with an original Carrera DIGITAL 124/132 trans-
former.
The PC interface (PC Unit) may only be operated together with the
original Carrera PC Unit.
EVOLUTION
Assembly instructions
4
3
Before assembling please insert the connecting clips
3
. Stick tracks together on a flat
1
2
Electrical connection
in direction
).
3