Motorola PMLN7018 Guia Del Usuario página 6

6078.book Page 4 Friday, March 25, 2016 2:43 PM
2. Push the TETRA Handportable Terminal downward
toward the bottom of the cradle/holder and tilt backwards
until it locks onto the swivel hook.
Swivel hook
Alignment Guide
Figure 1. PMLN6182 Charging Cradle with Vehicular Power
REMOVING THE TETRA
HANDPORTABLE TERMINAL FROM THE
CRADLE/HOLDER
1. Push the swivel hook clockwise to release. (See Figure 1
on page 4).
2. Lift the TETRA Handportable Terminal upwards from the
cradle/holder.
PMLN7018 PASSIVE VEHICULAR RADIO
HOLDER KIT OPERATION
This kit is designed to provide a mounting solution to the
appropriate TETRA MTP3000 Series Handportable Terminal.
This holder secures only the radio and does not provide any
charging function.
Module.
4