Bluetooth Remote Control And Bluetooth Speaker - Ninebot Mecha Kit Manual Del Usuario

Shooting: pull the trigger to shoot.
7
* In case of shooting failure, please refer to
"Appendix 3: Troubleshooting for a blocked
launch tube".
trigger
Mecha Kit Charging: remove the battery from the battery compartment, connect the USB charging cable, and then
9
connect them with the power supply.
* If you do not use the Mecha Kit for a long time, please remove the battery and charge it in time.
Charging indicator
1. Do not use a non-original USB charging cable.
2. The standard input voltage of USB charging cable is 5 V and the standard current of it is 1–2A. Any of the
parameters beyond the range will result in failure to charge.
3. Please strictly follow the charging reminders and battery maintenance safety rules in the user manual of the the
the self-balancing vehicle. Due to the design of over-temperature protection, the vehicle can only be able to charge
normally when the temperature of the vehicle body remains below 40℃.
18
Shutdown: after stopping the Mecha, power off the
8
Ninebot S first, and then power off the Mecha Kit.
* Mecha Kit will automatically shut down after 5
minutes without any operation.
* Status of the charging indicator:
Red light flashes—the power supply is connected;
Solid red light on—charging;
Light off—the battery is fully charged.

7. Bluetooth Remote Control and Bluetooth Speaker

Bluetooth Remote Control
You can control the moving and shooting of Mecha through the app.
Steps: Vehicle > Bluetooth remote control > drag virtual joystick to control the moving direction + click or long press the
virtual shooting key on the right side to shoot.
Mecha xxxx
Features
Bluetooth
remote
control
Bluetooth Speaker
Use your mobile device to connect the Mecha Kit
Bluetooth to play music, making the drive more fun.
Method: open Bluetooth > search device:
MechaAUDxxxx > pairing to connect the device.
Self-balancing vehicle Mecha Kit
km/h
MechaAUDxxxx
19