Festo CPX-E-EP Manual De Instrucciones página 27

Parametrización
N.º de atributo Acceso
6 Set (NV)
7 Get
8 Get
9 Set (NV)
10 Get
11 Get
Festo — CPX-E-EP — 2020-01a
Descripción
– MAC receive errors
Interface control
Control bits
Bit 0: Autonegotiate
0 = Autonegotiation disabled
1 = Autonegotiation enabled
Bit 1: Forced duplex mode
0 = The interface duplex should be halfduplex
1 = The interface duplex should be fullduplex
Bit 2 15: Reserved, shall be 0
...
Forced interface speed (in Mbps)
Interface type
0 = Unknown interface type
1 = The interface is internal to the device
2 = Twisted-pair
3 = Optical fiber
Interface state
0 = Unknown interface state
1 = The interface is enabled and ready to
send/receive data
2 = The interface is disabled
3 = The interface is testing
Admin state
1 = Enable
2 = Disable
Interface label
Interface capability
Capability bits
– Bit 0: Manual setting requires reset
– Bit 1: Autonegotiate
– Bit 2: Auto MDIX
– Bit 3: Manual speed/duplex
– Bit 4 31: Reserved, shall be 0
...
Speed/duplex array count
Tipo
STRUCT of
WORD
STRUCT of
UINT
USINT
USINT
USINT
SHORT_STRIN-
G
STRUCT of
DWORD
STRUCT of
USINT
27