Taurus TAS-2250 Manual Del Usuario página 14

begun a process to eliminate the ice
that has become deposited on its
outdoor radiator.
Instructions for use
Warning about use of the remote
control.
-The remote control buttons only work
if the unit is switched on.
-Always aim the remote control's signal
towards the indoor unit's signal receiver.
When the unit receives the signal, you
will hear a beep.
-Do not place the remote control near
electrical appliances such as electric
blankets, heaters, etc.
-Do not expose the remote control to
direct sunlight.
-No object must be placed between the
remote control and the air conditioning
appliance.
-Do not drop the remote control on the
floor.
-Do not submerge the appliance in water
or any other liquid or put it under the
tap.
-Do not place heavy objects on top of
the remote control.
Function of the indicator lights
-Connection light: comes on when the
unit is plugged into a socket.
-Sleep function light: comes on when
sleep mode is activated.
-Operating light: comes on when the
compressor is operating.
-Timer light: comes on when the
appliance is in Timer activated mode.
-LED Screen: comes on when the unit
is plugged into the mains and shows
the selected temperature.
Operating mode
-Heating
-Dehumidifying
-Cooling
-Fan
-Automatic
-Press the MODE button to select the
working mode for the appliance. Every
time you press this button the mode
will change successively in the
sequence described above.
Temperature setting " " " "
-Every time you press the temperature
setting button, the set temperature will
go up or down one degree.
Automatic operation "
-With automatic operation mode you
can automatically set the optimum room
temperature just by pressing a button.
-Press the mode button. When " " is
displayed, the appliance will
automatically control the optimum
temperature. To stop it, press the button
again.
-If, after about 15 minutes have elapsed
from when the appliance was switched
on, the ambient temperature is slightly
warm, press the " " button to reduce
the temperature by about 1ºC. If the
ambient temperature is slightly cool,
press the " " button to increase the
temperature.
Description of automatic mode.
-The operating mode will automatically
be set to cooling or heating mode
depending on the temperature of the
room when the appliance is switched
on. However, when the appliance starts
working again two hours after having
stopped it will select the same operating
"