Dash Disassembly - Metra 99-9227 Manual Del Usuario

1. Move the shifter to the rearmost
position, unsnap the shifter trim
and move it to one side. (Figure A)
2. Remove (2) T-25 Torx screws from
bottom of the radio/ climate control
cluster. (Figure B)
CAUTION: Do not remove
connectors before turning
the ignition off.
3. With radio and climate controls
out, remove (4) T-25 Torx screws
holding the radio to the bracket,
release the clips and remove the
radio. (Figure C)

Dash Disassembly

(Figure A)
99-9227
(Figure B)
2
(Figure C)