Dinner Plate Function; Pizza Function; Memory Function; Multi-Stage Cooking - Silvercrest SMW 900 B1 Manual Del Usuario

8.12. Dinner plate function


Press "Dinner Plate" repeatedly until the number you wish appears in the display; "9.0", "12.0",
"18.0" oz. will display in order.
For example, press "Dinner Plate" once; "9.0" appears.

Press "Start/+30sec." to cook; the buzzer sounds once. When cooking finishes, the buzzer sounds
five times and then returns to the waiting state.
The cooking time depends on the input weight and is automatically calculated by the
microwave.

8.13. Pizza function


Press "Pizza" repeatedly until the number you wish appears in the display; "4.0", "8.0", "14.0" oz.
will display in order.
For example, press "Pizza" once, "4.0" appears.

Press "Start/+30sec." to cook; the buzzer sounds once. When cooking finishes, the buzzer sounds
five times and then returns to the waiting state.
The cooking time depends on the input weight and is automatically calculated by the
microwave.

8.14. Memory function


Press "0/Memory" to choose the memory 1–3 procedure. The screen will display 1, 2, 3.

If the procedure has been set, press "Start/ +30sec." to use it. If not, continue to set the procedure.
Only one or two stages can be set.

After finishing the setting, press "Start/ +30sec." once to save the procedure. If you press "Start/
+30sec." again, it will start cooking.
Example: To set the following procedure as the second memory, i.e. memory 2, in order to cook the
food with 80% microwave power for 3 minutes and 20 seconds. The steps are as follows:

In the waiting state, press "0/Memory" twice; stop pressing until the screen displays "2".

Press "Time Cook" once, and then press "3", "2", "0" in order.

Press "Power" once; "PL10" displays; then press "8" and "PL8" displays.

Press "Start/ +30sec." to save the setting. Buzzer sounds once and the screen will display "2".
If you press "Start/+30sec." again, the procedure will be saved as the memory 2 and
operated.

If you want to run the saved procedure, press "0/Memory" twice while in the waiting state; the
screen displays "2"; then press "Start/+30sec." to run.

8.15. Multi-stage cooking

A maximum of two stages can be set for cooking. In multi-stage cooking, if one stage is
defrosting, then defrosting shall be placed at the first stage automatically.
Auto cooking cannot work in multi-stage cooking.
SilverCrest SMW 900 B1
- 21