Molift Quick Raiser 205 Manual De Usuario página 10

Molift QuickRaiser 205 / www.etac.com
4 - Lifting Arm
Place the cover onto the lifting arm. Place lifting
arm in trolley, and insert the bolt.
Insert the bolt and tighten the screw using the
17mm spanner and an 6mm allen key.
Make sure the lifting arm is properly fastened to
the trolley on the column.
Fit the cover onto the trolley
5 - Mains cable
Connect the mains cable to the bottom of the
battery box.
Fit the cover on to the chassis. Remember to put
the tools back in place.
10