Molift Quick Raiser 205 Manual De Usuario página 18

Molift QuickRaiser 205 / www.etac.com
Raising/Lowering
When moving the user, stand to the side of the
person you are lifting. Make sure that arms and
legs do not obstruct the seat, bed, etc. Keep eye
contact with the user to help them feel safe.
If possible: Extend the width of the wheel base
prior to lifting using the button for base width
adjustment on the Hand control.
1. Check that the sling is correctly fitted around
the user and that the strap loops are correctly
fitted to the suspension hooks.
2. Make sure user has both feets placed firmly on
the footplate on the lifter.
3. Stretch the sling straps without lifting the user.
Ensure that both loops of the sling are securely
fastened to avoid the user slipping or falling.
4. Make sure the buckle is properly fastened
5. Lift user to standing postition, and tighten and
adjust the sling if necessary.
Make sure the users hands are
placed correctly to avoid that the
lifting straps are squeezing the
users hands and fingers.
NB! The wheels of the object the user is being
lifted from or into must be in the locked position.
Transfer
Raise the patient carefully until the buttocks are
clear from the seating and tighten the belt. Unlock
the wheels on the lifter and move the patient to
the next location.
Be careful during movement not to run into
furniture, walls, doors etc.
The lifter shall not be used to lift or
move users on sloping surfaces
Avoid deep pile carpets, high thresholds, uneven
surfaces or other obstacles that may block the cas-
tors. The lifter may become unstable if forced over
such obstacles increasing the risk of tipping over.
The lifter shall only be used for movement over
short distances. It is not a replacement for wheel-
chair or similar.
18