Molift Quick Raiser 205 Manual De Usuario página 9

2 - Leg support
Mount the leg support bracket.
3 - Lifting column and chassis
Place the cover on to the lifting column. Twist the
cover sideways to make it stay on column. Insert
the lifting column into the chassis.
Mount the screw with washer on column. Slide
the screw down to chassis, and tighten the screw.
Turn the lifter over on the side. Insert screw and
washer in the top hole and tighten the screw.
Connect cable between column and chassis.
(NB! The cable is NOT applicable with the Molift
Quick Raiser 205 FL version)
The screws will ensure that the column
cannot be pulled upwards. Do not use
lifter unless both screws are securely
fastened.
9
Molift QuickRaiser 205 / www.etac.com