Quick Installation - Tripp-Lite OMNISMART El Manual Del Propietario

All manuals and user guides at all-guides.com

Quick Installation

Connect your computer to
1
the UPS, and the UPS to an
electrical outlet.
1. Unplug your computer's power cord from both
your AC outlet and your computer's AC input.
2. Find the power cord that came with your UPS
(A). Insert the UPS cord's female plug into your
computer's AC input. Insert the UPS cord's
male plug into any of your UPS's female output
receptacles.
3. Insert the female plug of your computer's cord
(B) into your UPS's AC input. Insert the male
plug of your computer's cord into your AC
outlet.
Plug your monitor and
2
external modem into battery-
supported outlets. Plug other
equipment into surge-only
outlet(s).
Separate battery-supported/surge and surge-only
outlet(s) are available only on select models
(identified on the back of your UPS). Your UPS is
designed to support only computer equipment. You
will overload your UPS if you connect household
appliances, laser printers or surge suppressors to
the battery-supported outlets.
Cords and receptacle adapters are available from
Tripp Lite to accommodate most outlet configura-
tions. If rewiring is necessary, refer to the Wire
Color-Code Chart at the bottom of the page.
Set your UPS's "OFF – ON" Switch.*
3
USA, Canada & Western Europe
· Set it and leave it "ON" at all times.
All Other Countries
· Set to "OFF" when you are not using connected equipment.
(WARNING! When set to "OFF," UPS will not provide battery
backup during a blackout or brownout)
· Set to "ON" when you are using connected equipment.
*See Basic Operation section for the Switch Function, UPS Conditions and Setting Advantages.
Wire Color
Black Brown
American
White
Blue
European
AMER EURO
Wire Reference
Green/
American
Green
Yellow
European
A
Wire 1 Wire 2
Black White
Brown Blue
Wire 1 Wire 2
Line 1 Neutral
Line 1 Line 2 or Neutral
B
SEE MANUAL
Wire 3
Green
Green/Yellow
Wire 3
Ground
Ground
3