Step 3: Fit Your Lightspeaker - Ebode LightSpeaker El Manual Del Propietario

All manuals and user guides at all-guides.com
®

Step 3: Fit your LightSpeaker

.
®
Your LightSpeaker is designed to fit directly into most
recessed fixtures, table lamps and pendants by simply
removing the existing light and, in the same manner as a
®
light bulb, re-installing your LightSpeaker in its place.
Because of all the technology packed into LightSpeaker,
it is much larger than a normal light bulb, both in length
and width. The best way to use Lightspeaker is in a fitting
where you cannot actually see the sides of the product at
all. As long as the front grille is unrestricted so you can
hear the music and see the light, you do not really want
to see where the sound and light comes from. In general
this means that the ideal is a long, slim lampshade rather
than one short and wide.
Please give this some thought when choosing a fitting for
your LightSpeaker.
Please note - between the front edge of the E27 socket in
your fitting and the front Grille of LightSpeaker you need
to have a shade/fitting that will be at least 15 cm long
and 14 cm wide
At www.ebodeelectronics.eu you can find a selection of
lampmodels that will work with LightSpeaker
10