Troubleshooting The Remote - Ebode LightSpeaker El Manual Del Propietario

All manuals and user guides at all-guides.com

Troubleshooting the Remote

If your remote does not operate when any of the buttons
are pushed:
A) Check the batteries to be certain that they have
a charge. Replace them if necessary.
The remote may need to be paired to the transmitter.
To pair the transmitter:
A) Press the pairing button on the back of the
transmitter. Five lights on the transmitter keypad
(Zone 1, Zone 2, Source 1, Source 2 and the pairing
light in the front) will light up and begin flashing;
B) Stand 60-120 cm away from the transmitter
with the remote. Press and hold the Zone 2 key on
the remote for about 4 seconds. All lights will stop
flashing, then pairing is complete. In the event this
does not work, try again, beginning at Step A.
If the remote still does not operate, try pairing one more
time, contact your local dealer where you bought your
system, or visit www.ebodeelectronics.eu.
27