Step 6 - Plug In Your Sources - Ebode LightSpeaker El Manual Del Propietario

All manuals and user guides at all-guides.com
4) Turn on all light switches that your LightSpeakers
are connected to. The Small LED
light on the speakers will begin
to flash red and will turn green
when the pairing is complete. The
transmitter will automatically find
each speaker and assign it to its
proper zone.
5) If after 1 minute the LED on the LightSpeaker
has not turned "GREEN", repeat steps 1-4.
a) If after 2 attempts the LED on the
LightSpeaker
relocating the Transmitter closer to the
LightSpeaker
Step 6: Plugging in your sources.
Using the supplied audio cords, plug your MP3, CD Player,
television or other desired sources to the back of the
transmitter.
Attach 1 or 2 audio sources.
LED Blinks during pairing.
®
fails to turn green, try
®
®
®
MP3
15