Where To Put The Transmitter - Ebode LightSpeaker El Manual Del Propietario

Ocultar thumbs Ver también para LightSpeaker:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 142
B) Removal of the lens AFTER your LightSpeaker
been installed.
1) There are three small indentations around the
lens; with a small tip common screwdriver, nail file,
paper clip or similar object, gently slip the tip into
the indentation and pry the lens outward until the
retaining tabs pull free.
2) To re-install the lens, align the tabs and the
hole for the pairing LED, then push gently until the
locking tabs snap into place.
More Ab

Where to put the transmitter?

Typically, the perfect place for your transmitter is near
your home entertainment system, if you have one. If you
don't have a home audio system then you can chose
a place that is centrally located to the rooms you will
be transmitting the audio to. Remember the range of
the system is approximately 15 meter* radius circle
of the transmitter, so as long as the distance from the
transmitter to the farthest speaker in any direction is less
than 15 meters*, the placement of the transmitter is up
to you.
Note: There is a maximum of two transmitters in one
home and they need to be 8 meters* apart.
*Range depending on environmental conditions.
20
All manuals and user guides at all-guides.com
®
has

Publicidad

Tabla de contenido
loading

Tabla de contenido