Metra 99-7343 Instrucciones De Instalación página 3

4. Remove (4) Phillips screws securing the
radio, and then unplug and remove.
(Figure D)
5. Remove the (4) Phillips screws securing
the display screen, and then remove.
(Figure D)
6. Remove the (4) Phillips screws securing
the factory brackets to the screen,
and then remove. Secure the display
brackets provided to the display using
the factory screws, and then secure it
back into the dash using the factory
screws. (Figure E)
Continue to Kit Preparation
DASH DISASSEMBLY
(Figure D)
(CONT.)
(Figure E)
3
REV. 4/7/2018 INST99-7343