Metra 99-7343 Instrucciones De Instalación página 5

To the 99-7343 radio trim panel:
1. Snap the A/C vents into the A/C vent
trim panels. (Figure A)
2. Attach the A/C vent trim panels, and
the factory climate control panel, to the
panel using the (10) #8 x 1/2" Phillips
pan-head screws, and (2) #8x1/4" pan-
head screws provided. (Figure B)
3. Snap the hazard switch into the
assembly. (Figure C)
4a. For models with a passenger airbag
light: Attach the factory passenger
airbag light to the assembly using the
(2) #8 x 1/2" Phillips pan-head screws
provided. (Figure D)
4b. For models without a passenger airbag
light: Attach the passenger airbag light
blank plate to the assembly using the
(2) #8 x 1/2" Phillips pan-head screws
provided. (Figure D)
Continue to Kit Assembly
KIT PREPARATION
(Figure A)
(Figure B)
(CONT.)
(Figure C)
Note: #8 x 1/4" pan-head
screws must be installed in
the indicated locations.
(Figure D)
REV. 4/7/2018 INST99-7343
5