Chauvin Arnoux PEL102 Guia De Inicio Rapido página 6

INSTALLATION OF THE COLOUR-CODED IDENTIFIERS
For polyphase measurements, mark the current sensors, the voltage leads, and the terminals using the coloured rings
and inserts provided with the instrument, assigning one colour to each terminal.
Detach the appropriate inserts and place them in the holes above the terminals (the large ones for the current
„
terminals, the small ones for the voltage terminals).
Clip a ring of the same colour onto each end of the lead that will be connected to the terminal.
„
INDICATORS
Indicators and colour
REC
Green indicator
(PEL102 / PEL103)
REC
Red indicator
(PEL104)
Blue indicator
Green indicator
(PEL104)
Green indicator
(PEL104)
Red indicator
OL
Red indicator
Red/green indicator
Recording status
Indicator off: no recording pending or in progress
Indicator blinks once every 5s: recorder on standby
Indicator blinks twice every 5s: recording in progress
Recording status
Indicator off: no recording pending or in progress
Indicator blinking: recorder on standby
Indicator lit: recording in progress
Bluetooth
Indicator off: Bluetooth link de-activated
Indicator lit: Bluetooth link activated but not transmitting
Indicator blinking: Bluetooth link transmitting
Wi-Fi
Indicator off: Wi-Fi link de-activated
Indicator lit: Wi-Fi link activated but not transmitting
Indicator blinking: Wi-Fi link transmitting
3G-UMTS/GPRS
Indicator off: 3G link de-activated
Indicator lit: 3G link activated but not transmitting
Indicator blinking: 3G link transmitting
Phase order
Indicator off: phase order OK
Indicator blinking: phase order incorrect.
Overload
Indicator off: no overload on the inputs
Indicator blinking: at least one input is overloaded, a lead is missing or is connected to the wrong
terminal
SD card
Indicator lit green: the SD card is OK
Indicator blinking red: SD card being reset
Indicator blinking red and green: the SD card is full
Indicator blinking light green: the SD card will be full before the recording in progress ends
Indicator lit red: the SD card is missing or locked
Description