AERMEC AER Connect Manual De Instrucciones página 33

2.2 AERCONNECT AND SINGLE ETHERNET-RS485
Configuration for this type of connection:
1. Make all the electrical connections correctly (specified in chapter 2.5 p. 9);
2. Configure the parameters relating to the serial port (Modbus address, Baud rate) of the VMF-E6 panel;
3. Activate the recognition and configuration procedure of the Ethernet-RS485 expansion through the MGate-Manager software (3.1 p. 11);
4. Activate the webserver recognition and configuration procedure using the "AerConnect Search for devices" (3.2 p. 17) software;
5. System is ready for use;
6
Ethernet-RS485
RS485 (BMS)
VMF-E6 (1)
VMF-E6 (2)
VMF-E6 (6)
RS485 (VMF)
RS485 (VMF)
RS485 (VMF)