AERMEC AER Connect Manual De Instrucciones página 44

3.2 CONFIGURATION OF THE AERCONNECT WEBSERVER
Like the Ethernet-RS485 interface, the AerConnect webserver must use the "AerConnect.exe" software to be configured. Below are the required steps to operate the module.
Attention: during installation, rules are applied to the windows firewall to allow the program to use the PC network. In some cases it must be verified
that there are no additional firewalls, such as anti-virus, which block the communication channels.
1. Run the AerConnect.exe software and press the search for devices key ( ).
ATTENTION: the PC must be connected on the same IP network as the AerConnect device to send the configuration.
17