AERMEC AER Connect Manual De Instrucciones página 45

2. Once the search is completed, the list of web servers on the network will appear in the "Device" section.
The following functions can be activated by selecting the webserver in question, from the Tools menu:
— Update/search for VMF-E6 panels
— Configuration of the AerConnect device IP address
— Reboot the AerConnect device
— Reset the default configuration of AerConnect
— The network settings are set to:
— IP:10.0.0.100,
— subnetmask 255.0.0.0,
— gateway 10.0.0.1;
— Only one VMF-E6 is configured with modbus address 1, RTU connection at 38400; HTTP port 80, OpenDNS, timeout 60. Language "English" and "Europe/Rome" time zone.
— Opening the Chrome browser (if installed on the PC)
18